Posts for tag: dental implant

By River Forest Dental Studio
December 27, 2020
Category: Dental Procedures
Tags: dental implant  
SmokingCouldIncreasetheRiskofanImplantFailure

Although they can be expensive upfront, dental implants often prove to be a wise investment in the long-term. With a success rate that outperforms other teeth replacement restorations, dental implants could be the answer to a more attractive smile that could last for decades.

But while their success rate is high (95% still functioning after ten years), they can and do occasionally fail. Of those that do, two-thirds happen in patients who smoke.

This unfortunate situation stems from smoking's overall effect on dental health. The nicotine in tobacco constricts oral blood vessels, inhibiting the flow of nutrients and antibodies to the teeth and gums. Inhaled smoke can scald the inside skin of the mouth, thickening its surface layers and damaging salivary glands leading to dry mouth.

These and other effects increase the risk for tooth decay or gum disease, which in turn makes it more likely that a smoker will lose teeth than a non-smoker and require a restoration like dental implants. And blood flow restriction caused by nicotine in turn can complicate the implant process.

Long-term implant durability depends on bone growth around the imbedded implant in the ensuing weeks after implant surgery. Because of their affinity with the titanium used in implants, bone cells readily grow and adhere to the implant. This integration process anchors the implant securely in place. But because of restricted blood flow, the healing process involved in bone integration can be impaired in smokers. Less integration may result in less stability for the implant and its long-term durability.

To increase your chances of a successful implant installation, you should consider quitting smoking and other tobacco products altogether before implant surgery. If that's too difficult, then cease from smoking for at least one week before surgery and two weeks after to better your odds of implant success. And be as meticulous as possible with daily brushing and flossing, as well as regular dental visits, to reduce your risk of disease.

There are many good reasons to quit smoking. If nothing else, do it to improve your dental health.

If you would like more information on tobacco use and dental health, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants & Smoking.”

By River Forest Dental Studio
September 24, 2019
Category: Dental Procedures
Tags: dental implant  
YourQuestforaDentalImplantMightBeInterruptedbyBoneLoss

Years ago, disease or trauma robbed you of one of your teeth. At the time you might have opted for an affordable solution, like a partial denture. But now you'd like to restore that missing tooth with a dental implant, the most life-like tooth replacement available.

That's a great decision. But there may be a hiccup along the way to your new implant: the state of the underlying jawbone. Implants need a certain amount of bone for proper placement. If not enough is present, that may cause an interruption in your plans—and that could be a real possibility if your tooth has been missing for some time.

That's because, like other living tissues, bone has a growth cycle: Old bone cells die and dissolve, while new cells form to take their place. In the jaw, the force produced by teeth during chewing helps to keep this growth process in the bone functioning at a healthy pace.

When a tooth goes missing, though, so does this chewing stimulation. A lack of stimulation can slow the growth rate for that part of the bone and its volume can diminish over time. It's possible for a quarter of the bone volume to be lost within the first year after losing a tooth.

If you've experienced that level of bone loss, we may not be able to place an implant—yet. You might still have a few options. For one, we could attempt to regenerate some of the bone through grafting. Bone material grafted into the affected area can serve as a scaffold for new bone cells to form and adhere. Over time, this could result in a sufficient amount of regenerated bone to support a dental implant.

Another possibility might be to install a smaller diameter implant like those used to support removable dentures. Because they're smaller they require less bone than standard-sized implants. They're not for every situation, though, and are best suited for situations where aesthetics isn't a priority.

To know what your options are regarding an implant-based restoration, you'll need to undergo a thorough evaluation of your oral health, including supporting bone. Depending on your situation, you may still be able to renew your smile with this premier tooth replacement option.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants After Previous Tooth Loss.”

By River Forest Dental Studio
September 04, 2019
Category: Uncategorized
Tags: dental implant  
TheDigitalRevolutionIsTransformingImplantTherapy

Compared to other dental restorations—a few of which have been around for over a century—implants are a relatively recent development. But even though it's just now entering its fourth decade, recent advances have catapulted implant therapy well beyond where it began.

That's due mainly to digital technology. Two examples of this, computed tomography (CT) and 3-D printing, are increasing the accuracy and efficiency of implant placement.

Properly placing an implant is one of the most important elements in achieving a natural and attractive result. But finding the best location is often difficult due to a lack of suitable bone volume, the patient's bite or the proximity of anatomical structures like nerves and blood vessels. CT imaging, especially Cone Beam CT scanners (CBCT), is helping to make implant placement planning easier.

Unlike the static, two-dimensional views of standard x-rays, CBCT takes hundreds of images and digitally blends them together to create a virtual 3-D model of the patient's jaw and face. Dentists can view this highly detailed model on a computer monitor from various vantage points and better identify possible obstructions. With better information about what "lies beneath," they can more accurately pinpoint the best implant site.

Creating the ideal plan is one thing—successfully implementing it is another. Dentists often create a surgical guide that helps them drill in precisely the right positions during surgery. The guide, which resembles a mouthguard, fits over the gums and contains marker locations for drilling.

Many dentists are now using 3-D printing to create these surgical guides. A 3-D printer turns a digital model of the guide based on measurements of the patient's mouth and proposed implant locations into an actual physical object "printed out" layer by layer of special polymer material. The end product can be more precise than guides created by other means.

These and other technological developments are helping implant therapy rise to a new level of success. With the resulting increase in accuracy, efficiency and less treatment time, tomorrow's implant patients will be the ultimate beneficiaries.

If you would like more information on restoring missing teeth with dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “How Technology Aids Dental Implant Therapy.”

By River Forest Dental Studio
May 07, 2019
Category: Uncategorized
Tags: dental implant   bridge  
YourTeenagernotReadyforanImplantHeresWhatWeCanDoInstead

Losing a tooth can be traumatic, but a dental implant can dramatically turn that experience around. Providing functionality, life-like appearance and durability, implants stand out as the premier restoration for lost teeth.

For adults, that is. An older child or teenager with a missing tooth may need to wait a few more years for an implant. The reason: jaw development. A person's jaws, particular the upper jaw, continue to grow with most growth completed by early adulthood. Natural teeth with their periodontal attachments develop right alongside the jaw.

But because an implant attaches directly to the jawbone, its position is fixed: it won't change as the jaw grows and may gradually appear to sink below the gum line. That's why we wait to place an implant until most of jaw maturity has occurred after full jaw maturity. For females, we try to wait until 20 years of age and for males, usually 21 years of age. These are guidelines as some people mature faster and some slower, so a discussion with your dentist or surgeon is necessary to make an educated decision.

While we wait, we can install a temporary replacement for a child's or teenager's lost tooth, usually a partial denture or fixed modified ("Maryland") bridge. The latter affixes a prosthetic (false) tooth in the missing tooth space by attaching it to the back of natural teeth on either side with bonded dental material. It differs from a traditional bridge in that these supporting teeth aren't permanently altered and crowned to support the bridge.

During the time before implants we should understand that the area where the implant will be placed will undergo some bone deterioration, a common consequence of missing teeth. Forces generated as we chew travel through the teeth to stimulate renewing bone growth all along the jawbone. But with a lost tooth the chewing stimulation ceases at that part of the bone, slowing the growth rate and leading to gradual bone loss.

Fortunately, the titanium posts of dental implants stimulate bone growth as bone cells naturally grow and adhere to their surfaces. Before then, though, if the bone volume is diminished, we may need to graft bone material to stimulate bone growth that will enlarge the jaw bone enough for an implant to be placed.

It usually isn't a question of "if" but "when" we can provide your child with an implant for their missing tooth. In the meantime, we can prepare for that day with a temporary restoration.

If you would like more information on dental restorations for teenagers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants for Teenagers.”

By Dr. Hartmann D.D.S
February 16, 2012
Category: Dental Procedures
DentalImplantsQuiz

How much do you know about dental implants? Test yourself with this quiz.

  1. Earliest recorded attempts at using dental implants were from
    1. Medieval England
    2. The ancient Mayans
    3. U.S.A. in the 1950s
  2. Dental implants are called endosseous. What does this mean?
    1. They fuse with the bone
    2. They are inside the mouth
    3. They are not real teeth
  3. What are most dental implants made of?
    1. Aluminum
    2. Titanium
    3. Steel
  4. What part of the tooth does an implant replace?
    1. The implant is the root replacement
    2. The implant is the root plus the crown
    3. The implant is the crown
  5. What is the success rate of dental implants?
    1. 50 percent or less
    2. 75 percent
    3. 95 percent or more
  6. What could cause an implant to fail?
    1. Smoking or drug use
    2. Poor bone quality and quantity at the implant site
    3. Both of the above
  7. What is a tooth's emergence profile?
    1. The implant and crown's shape as it emerges from beneath the gum line
    2. A measure of the urgency of the tooth replacement
    3. A measure of the time it takes for you to be able to chew on the new implant
  8. What are some of the factors that go into the aesthetics of designing the crown?
    1. Choice of materials
    2. Color matching
    3. Both of the above
Answers:
  1. b. The concept of dental implants goes back to the Mayan civilization in 600 AD.
  2. a. The word endosseous (from endo meaning within and osseo meaning bone) refers to the implant's ability to fuse with or integrate with the bone in which it is placed.
  3. b. Most implants are made of a titanium alloy, a metallic substance that is not rejected by the body and is able to fuse with the bone.
  4. a. The term “implant” refers to the root replacement, which is anchored in the gum and bone. A crown is put around the implant where it emerges from the gumline.
  5. c. The majority of studies have shown long term success rates of over 95 percent.
  6. c. Factors that could cause an implant to fail include general health concerns such as smoking and drug use, osteoporosis, or a compromised immune system; poor bone quality or quantity; and poor maintenance such as lack of proper brushing and flossing.
  7. a. The emergence profile has a lot to do with the implant's natural appearance. It involves the way the crown, which attaches to the implant, seemingly emerges through the gum tissue like a natural tooth.
  8. c. Choices such as materials, color, and position can be worked out in the design of a customized temporary crown, which acts as a template or blueprint for a final crown.

Contact us today to schedule an appointment to discuss your questions about dental implants. You can also learn more by reading the Dear Doctor magazine article “Matching Teeth & Implants.”



Gina Piccioni, D.M.D. and John G. Hartmann, D.D.S.

River Forest, IL Dentist

River Forest Dental Studio

Archive:

Tags